RACE VERSION
BASE BOAT SPECIFICATION
(click to print pdf)

RACE VERSION BASE BOAT INCLUDES:

HULL
Sandwich construction with vinylester resin in female molds. Balsa core in hull, PVC foam in deck all constructed using infusion process. Hardwood inserts in way of all hardware. Monolithic (solid glass) areas in way of sail drive, keel, rudder bearings, thru-hulls, crash box.
Reserve buoyancy of 3 cubic meters of foam per Class 40 rules.

COCKPIT, CABIN TOP, CABIN SIDES, TRANSOM, INTERNAL STRUCTURES
Sandwich construction with vinylester resin, PVC foam and infusion process on all components. All halyards and line from mast and inboard end of boom turn aft
at mast base, enter line tunnel through cabin, P & S, exit main cabin bulkhead, pass through vestibule shelf to jammer farm and utility winch, P & S.

KEEL
Acier E 36 Structural Grade Steel – WELDOX 960
Rectangular box section fabricated steel blade faired to templates.
Lead Bulb
Design drawings, engineering specs, a detailed weld plan and post build ultrasound/ X-ray testing and full compliant report provided with each keel.
Keel manufactured in France.

STEERING SYSTEM
Two rudders with solid stainless steel stocks as per class rules. Stock diameter is 49 mm.
F16PH stainless steel. JP3 self aligning water tight upper and lower rudder bearings.
Rudder structural grid is built using 316L stainless steel, rudder blade foam is 250kg/m3 and built with glass and epoxy resin. Rudders are connected below deck with an aluminum tube. Two laminated, varnished tillers in cockpit port and starboard, with adjustable stainless steel foot rests for support when heeling.

MAST and RIG
Manufactured by Lorima/ZSpars in France of pre-preg carbon and autoclaved.
Mast is built in female tool. Mast is deck stepped with double swept back spreaders (aluminum) and running backstays. Mast is finished with clear coat polyurethane. Mainsail track is Antal with removable gate for square top mainsail.
Shrouds are rod rigging, adjustable inner-forestay and running backstays are Kevlar.

HARDWARE
Harken winches, blocks and organizers. Spinlock rope clutches. Lewmar
hatches and Wichard deck hardware.
Pulpits, pushpits, stanchions and chainplates in 316L polished stainless steel.

BALLAST SYSTEM
Two tanks each side with a total of 750L/side to conform with Class 40 rules.
268L aft tank. 464L forward tank. Six watertight inspection hatches made by Henderson.
Tanks are filled and or emptied via two SoFoMarin scoops, extra large diameter hoses and electric high volume pump. Discharge and transfer is via gravity.

INTERIOR
Aft under cockpit P&S composite boxes encapsulating required flotation foam.
Settee bunks P&S main cabin with storage lockers throughout.
Central “Open Boat Style” navigation station with upper and lower pod for instruments and computers.
Aft face of navigation pod is galley area. Sink with foot pump operated salt and fresh water and recessed area for stove to stb’d..
48L Vetus fresh water tank
Bilge pump with float switch.
Utility bilge pump with roaming hose.
Marine Head located stb’d side aft of main bulkhead.

ENGINE
Nanni 3.100 HE diesel engine fresh water cooled with sail drive.
Three cylinder in line engine- 29 HP at 3,600 RPM
Engine panel with key start and RPM gauge mounted below
Oil pressure and water temp. alarms in engine panel
High quality marine exhaust hoses, waterlifts, seastrainers, thru-hulls, exhaust ports, etc.
88L Vetus Fuel Tank with remote shut off.

CUSTOM DECK PACKAGE
Floating titanium ring and sheeting system, P&S
Upgraded main sheet system
Two Tylaska snap shackles
Five Equiplite snatch blocks
Navtec swivel lashing eye on inner forestay lower fitting
2:1 Antal main halyard block
Hardware and line for code sail continuous furling system
Hardware and line for 2:1 tack line system
Hardware and line for 2:1 adjustable inner forestay set-up
Bobstay
11 Line storage bags

CUSHIONS & CANVAS
Custom sail cradle to fit boom with vertical side panels incorporating Lazy jacks
Sail cover
Pipe berth cushions
Nav seat cushion, ultra suede
Vestibule cushions (2)
Settee and V berth cushions.

MISC
Carbon boom
Spinlock engine control lever
Adjustable SS foot rests, P&S at helming station.
Gori folding racing propeller
Running rigging package, race version
Kevlar headstay
Adjustable height cradle
Custom central pushpit for antennas on transom centerline
Harken Racing Winches
Gimbaled one burner “Origo” non-pressurized alcohol stove

ELECTRICAL SYSTEM
Two12 position breaker panels
Three battery switches - house bank, engine start, parallel
Two bilge pumps with switches
Two DC outlets at chart table
Two LED chart table lights
Four fans
150 amp large case alternator with external regulator
One Optima engine start battery
Three Lifeline 100 amp hour Group 27 AGM batteries for house bank
Balmar digital, programmable regulator
Balmar Duo charge combiner
Mastervolt battery monitor
All cabling, wiring, junction boxes, fuses, bus bars, etc.

COMMISIONING
Epoxy barrier coat and antifoul paint to bottom, keel, rudders.
Fit and bond keel
Fit and install rudders
Launch
Step mast, tune rig

RACE VERSION OPTIONS: (See price list for specific costs)

B&G Autopilots and Sailing Instruments
B&G H3000 ACP 1 Autopilot Processor (2)
B&G H3000 Graphic Pilot Display (GPD) (3)
B&G H3000 Hercules Instrument Processor
B&G H3000 Graphic Funtion Display (GFD) (4)
B&G Type 1 Linear Drive (1)
Raymarine Type 2 Short Linear Drive (1)
B&G RRI (2)
B&G Halcyon 2000 Compass Sensor (1)
B&G Halcyon Gyro-Stabilized Compass (1)
B&G Halcyon Interface Cable (2)
B&G Speed Sensor w/flush housing (2)
B&G Depth Sensor w/flush housing (1)
B&G 213 Standard Masthead Unit
All necessary junction boxes, switches, cabling and labor

Computer System
Lenovo ThinkPad T61
17” 12VDC Moniter
Actisence Multi-plexer
SeaLevel Quad Port Serial USB Adapter
Keyboard
Trackball
Docking Station
DC Charging
All labor, cables, wiring, interfacing and set-up

Software
MaxSea Commander
MaxSea Weather routing module
MaxSea Sail Performance module
OCENS WeatherNet
UUPlus email
EasyMail Sat C
Installation and activation

Carbon Fiber Pole
Holding Tank
2nd Pilot Support
Facnor Drum Style furling Unit and Top Swivel - Solent
Facnor FX 4500 Continuous Line Furler, Top Swivel and 2:1 Block, Code 0
Masthead.
Facnor Code Sail Top Swivel & 2:1 Block - Code 5 Fractional
Sails
Fenders (4), Fender Covers (4) and Dock Lines (5)
Anchor Pkg: 15lb Fortress Anchor, Bag, 150' 1/2" Rode, 30' 5/16" Chain
LED Interior (10), LED Deck and Masthead Nav Lights
Inmarsat Mini C with Distress Button
Iridium Satellite Phone with Passive Antennae
Radar, GPS + NMEA Interface
Active Radar Transponder with Alarm
DSC VHF